CS2 console commands: Best commands for Counter-Strike 2 you need to know

For newcomers to Counter-Strike 2, there are some must-know console commands in CS2 that can significantly aid your gameplay. Here’s a list of the most indispensable and effective commands.

Having succeeded CS:GO, CS2 is now the game of choice for many, available to all. Counter-Strike 2 officially landed in the gaming scene on September 27, 2023.

Once you’re in, you’ll want to bookmark this page so you can get the most important console commands at any time.

Also, check out our guide to the best settings for CS2 here.

Contents

• How to enable console in CS2
• Best CS2 commands
• CS2 practice commands
• CS2 bot commands
• More useful commands
• CS2 launch commands

How to enable console in CS2

To enable the console in CS2, you need to go to the in-game settings, and navigate to the ‘Game’ tab.

You will then see a setting called ‘Enable Developer Console (~)‘. Change this to ‘Yes.’

This will then allow you to open the console at any time by pressing the ~ or ` key (usually top left on your keyboard). You will need the console to enter the commands below.

10 best CS2 console commands

Just like CS:GO, you can enter these commands in the developer console.

cq_netgraph 1

The net graph command, just like in CS:GO, will add a heads-up display of information about your latency in the top right-hand corner. Unfortunately, it’s not as comprehensive as the netgraph in CS:GO was.

cl_showfps 1

This command will display a live FPS (frames per second) on screen, so you can see how well your system is holding up with CS2. You can also do showfps 2, 3, 4, and 5, for more information.

fps_max 0

The fps_max command allows you to put a limit on your frames per second. But, if you want it to be unlimited, simply set it to 0.

bind [action] [key]

To bind actions to a key, use this command. For example, if you want to bind jump to Q, you would type bind jump q.

volume

Enter this command with a value after it to adjust the master volume of the game.

voice_modenable

This command will enable or disable voice chat in-game.

snd_voipvolume 0.5

Replacing the the voice scale command, you can alter the volume of your teammates voice chat using snd_voipvolume. This is a scaleable command, meaning you can increase or decrease the number at the end of the command, from 0-1.

r_drawtracers_firstperson 0

This will disable the tracers when firing from your own perspective (but not for other players!

disconnect

As the command implies, this will instantly disconnect you from the server you are in.

quit

If you want to quit CS2 entirely and return to the desktop, use this command.

Best CS2 practice commands

If you want to jump into a practice game without any interruption from other players or bots, you can use these practice commands to setup an easy training environment, to check out the maps and weapons in peace.

You can also apply some of these settings in the menu for practice matches, by turning on ‘Grenade Camera’, Infinite Ammo and Infinite Warmup.

sv_cheats 1

The cheats command is not actual cheats, don’t worry. It simply allows you to override some of the basic limitations of regular matchmaking, so you’ll need it for some of the following commands.

noclip

If you want to fly around the map and ‘clip’ through walls, no clip will let you do just that. You can also bind this to a key to have noclip on command. For example: bind alt noclip – this will bind noclip to the alt key.

sv_infinite_ammo 1

This command will give you infinite ammo in all weapons and grenades too. However, you can actually select this option on the left-hand side of the menu when launching a practice competitive map now.

mp_respawn_on_death_ct 1;mp_respawn_on_death_t 1

This command will instantly respawn you if you die.

mp_roundtime 60

This will give you an hour of time to practice without any round interruptions.

mp_buytime 60000;mp_buy_anywhere 1;mp_maxmoney 65535;mp_startmoney 65535

This will allow you to buy weapons at any time, and at any location on the map. The money commands will make sure you have enough cash to do so.

mp_restartgame 1

Sometimes, you’ll need to restart the game to make the commands above take effect, and you can do this with the restartgame command.

r_drawOtherModels 2

This will show an outline of other players, including bots, so you can see them through surfaces.

changelevel [map code]

If you want to quickly change maps in a practice server, use this command. For defuse maps, the code will also be de_[name]. For example, inferno is de_inferno.

launch_warmup_map [map code]

Like the previous command, this one will launch into a new practice match on your map of choice.

give weapon_[weapon name]

This will instantly give you the weapon you desire. Some weapons have unexpected names though, like usp_silencer for the USP-S.

sv_rethrow_last_grenade

This command will rethrow the exact same smoke, flash, molly or HE you threw. You can also bind this to a key, to have it on command.

sv_grenade_trajectory 1

This will show the path a grenade takes when thrown.

god

This command grants you god mode, meaning you take no damage. However, be warned – this command seems not to work sometimes!

kill

Instantly kill your character to respawn, with this command.

CS2 bot commands

bot_kick

This command will instantly kick all bots from the server.

bot_add

If you feel bad and want to bring the bots back, use this command.

bot_place

Adds a bot exactly where you are looking.

bot_crouch

This will make all bots crouch.

bot_stop 1

Immediately stops all bots moving. You can also make them move again by changing 1 to 0.

bot_mimic 1

This command will allow you to move the bot(s) around by having them mimic your inputs. Change to 0 to stop them.

More useful CS2 commands

These commands are not essential, but you might find value in them from time to time.

sensitivity

Enter this command followed by a value (e.g. 1.5) to alter your in-game mouse sensitivity. This can also be done in the settings with a sliding scale.

cl_drawhud 0

This command will remove all HUD elements, which can be useful if you want to take a clean screenshot.

r_drawOtherModels 2

Gives wallhacks in practice server (requires sv_cheats 1 command)

CS2 launch commands

In addition to in-game commands through the console, there are also a few launch commands that we’d recommend. To add these, you need to navigate to the ‘properties’ of CS:GO from your Steam library, by right-clicking on the game.

-novid

Novid will prevent the video from playing before launch, getting you to the main menu faster.

-high

The high command will ensure CS2 is given high priority in terms of CPU usage, preventing other apps or background processes from hogging power.

-nojoy

This command was popular in CS:GO as it disables joystick input which supposedly reduced RAM utilisation. We don’t know if this is still true in CS2, but it can’t hurt to add.

That’s it for now on the best commands for CS2, many of which are the same as CS:GO. For more on CS2, check out our other guides here:

What is sub-tick in Counter-Strike 2? | All smoke changes in Counter-Strike 2 | Can you play Counter-Strike 2 on Linux or macOS? | Can banned CS:GO players play Counter-Strike 2? | What will happen to my CSGO skins? | Will Counter-Strike 2 come to Steam Deck? | Everything we know about Counter-Strike 2